PRODUCT INFO
Japan Bonkote Co.Ltd
Far Infrared method Pre-Heater
Preheat workpieces and supplement the insufficient heat of soldering iron
PHN-3040
PHN-1520
HIーHEATER
～PHN-1013～
Introduction
The far infrared heater can uniformly heat the front and back of the base material and the entire surface.
PHN-3040
Stay →
ー
ー
※ PHN-3040 includs 2 pcs of stay bars.
※ Extra stay bars are available as an option.
PHN-1520
ー
ー
※ PHN-1520 includs 2 pcs of stay bars.
Features
■ The entire PCB can be uniformly heated by Far Infrared heater.
■ This is the most suitable preheater for lead-free solering.
■ Temperature rise characteristics can be adjusted by setting temperature.
■ By changing the position of stay bars, any types/shapes of PCB can be heated.
Usages
1. Preheating PCB having large heat loss patterns and components on it
2. Preheating multiple-layer PCB having through holes on it.
3. Preheating components which detest rapid temperature change
4. Assistance of detaching components while repairing.
5. Preheating PCB before flow/re-flow soldering.
6. Drying of pre-flux applied to the PBC.
Soldering temperature change with/without preheating
■ Preheater PHN-3040
■ Substance:90°C
■ The Preheater:200°C
■ The soldering iron:350°C
As for the preheated board, the temp, drop of the iron tip is small, and the heat rise of the object is quick. Soldering of through holes is easy.
Specifications
Model No.
PHN-3040
Input voltage
AC-100V
Power cable
2.0m with 3 pin plug
Heating method
Far Infrared radiation method（Ceramic heater）
Temperature control range
Room temperature ～ 200℃
Temperature control method
PID control
Environment
Temp.：0～40℃ Humidity：35～85%RH
Body dimensions(mm)
485W×330D×40H
Usable dimentions(mm)
380W×270D
Weight
4.8kg
Power consumption
1000W
Fuse
10A
Model No.
PHN-1520
Input voltage
AC-100V
Power cable
1.5mwith 3 pin plug
Heating method
Far Infrared radiation method（Ceramic heater）
Temperature control range
Room temperature ～ 200℃
Temperature control method
PID control
Environment
Temp.：0～40℃ Humidity：35～85%RH
Body dimensions(mm)
325W×214D×40H
Usable dimentions(mm)
180W×125D
Weight
1.9kg
Power consumption
500W
Fuse
5A
Option accessory Heater lid for PHN-3040
Material
Stainless（lid part）
Dimensions
(mm)
343W×283D×40H
Features
■ This is a lid for PHN-3040 only.
■ It enable PHN-3040 to shorten temperature rise time, and improve rising temperature without change of setting temperature.
■ Power consumption becomes less than half therefore you can contribute to reducing CO2 emissions.
■ It can be installed easily to PHN-3040 you have
Test conditions
Model：PHN-3040
Room temp.：20°C
PCB：1.6×80×120 (glass epoxy PCB)
Measurement ：connect the thermocouple to the surface center of PCB
PCB temperature can be rised up to 100℃ within approx. 90 sec.
